Far-field amplitude, Eprincipal: Linear, Tau = 90.000  deg
Gain = None Max far-field (global) = -33.41055  dB, Max far-field
(plot) = -33.37737  dB
Normalization: Peak (Plot), Network offset = 0.000  dB
Hpeak at: 0.000  deg, Vpeak at: 3.78491  deg
Plot centering: On
Directivity = 17.869 dB


Golfpijp antenne

NSI2000 V4.0.1S, Filename:C:\NSI2000\Data\MEETDATA\UHF\WGpOO.nsi Measurement date/time: 7/29/03 11:05:45 AM, Filetype: NSI-97
Far-field Cut Analysis:
-3. dB beam width: 68.99 deg
-6. dB beam width: 87.42 deg
-10. dB beam width: Not Found
Left Sidelobe: -3.11 dB at -45.095 deg
Right Sidelobe: -1.90 dB at 32.683 deg
Far-field display setup
Azimuth (deg)
Center = 0.000 deg, #pts = 1
Elevation (deg)
Span = 100.000 deg, Center = 3.78491  deg, #pts = 1001
Start= -46.21509 deg. Stop = 53.78492 deg. Delta = 0.100 deg
Plot rotation= 0.000  deg
Interpolation: Cubic
Coordinate system: Az/El; Polarization: L2 Az/El
Far-field transform setup
FFT size:  64,  32
X/Y/Z shift= 0.000  m, 0.000 m, 0.000 m
Filter Mode: Max FF, Zoom: Off
Probe setup: As-acquired
Probe model: OEWG WR430: 1.70-2.60 GHz
Selected beam(s) 1 of 3 
Beam 		AUT switch 	equency		Y axis 	X axis	Pol axis
-----		-----		-----		-----	-----	-----
Beam Name 3	  0.000      		2.460  GHz  	Y axis 	X axis 	Single-pol

Near-field setup:
Data - Raw near-field
Truncation: Off
Amplitude tapering: Off
Network correction: Off
Probe/AUT Z-axis: On,K-correction: Off
MTIgain: Off, MTIphase: Off

Measured data:
X (meters)
Span = 3.000  m, Center = 0.016 m, #pts = 52
Start= -1.484  m, Stop = 1.516 m, Delta = 0.05882 m
Y (meters)
Span = 1.500 m, Center = -2.350 m, fpts = 27
Start= -3.100  m, Stop = -1.600 m, Delta = 0.05769 m
Aut Width/Height: 0.850 m, 0.100 m
H/V Max Far-field angles: 60.000  deg, 50.000  deg
Probe-to-AUT spacing: 0.550 m

Measurement type: NF Planar XY
Scan options: CV Off, CP On, Bi-dir On, V-scan
Beamset smear: 0.01084  m
Scan plane compensation: On

Probe setup as acquired:
Probe model: OEWG WR430: 1.70-2.60 GHz
Probe-1: Lin-90(Ey), Probe-2:None

RF system:
Integration time:	1.960 mSec
Scan speed: 0.254	m/sec
Drift during scan	(final - initial)
Amp/Phase initial	= -18.07 dB, -25.3 deg
Amp/Phase drift  =  0.02  dB,  0.2  deg